Trace elements contamination of agricultural soils affected by sulphide exploitation (Iberian Pyrite Belt,Sw Spain)

Agricultural soils of the Riotinto mining area (Iberian Pyrite Belt) have been studied to assess the degree of pollution by trace elements as a consequence of the extraction and treatment of sulphides. Fifteen soil samples were collected and analysed by ICP-OES and INAA for 51 elements. Chemical analyses showed an As–Cu–Pb–Zn association related with the mineralisation of the Iberian Pyrite Belt. Concentrations were 19–994 mg kg⁻¹ for As, 41–4,890 mg kg⁻¹ for Pb, 95–897 mg kg⁻¹ for Zn and of 27–1,160 mg kg⁻¹ for Cu. Most of the samples displayed concentrations of these elements higher than the 90th percentile of the corresponding geological dominium, which suggests an anthropogenic input besides the bedrock influence. Samples collected from sediments were more contaminated than leptosols because they were polluted by leachates or by mining spills coming from the waste rock piles. The weathering of the bedrock is responsible for high concentrations in Co, Cr and Ni, but an anthropogenic input, such as wind-blown dust, seems to be indicative of the high content of As, Cu, Pb and Zn in leptosols. The metal partitioning patterns show that most trace elements are associated with Fe amorphous oxy-hydroxides, or take part of the residual fraction. According to the results obtained, the following mobility sequence is proposed for major and minor elements: Mn, Pb, Cd, > Zn, Cu > Ni > As > Fe > Cr. The high mobility of Pb, Cu and Zn involve an environmental risk in this area, even in soils where the concentrations are not so high.     

Assessment of sandstone deterioration at Ta Keo temple (Angkor): first results and future prospects

A first application of geomorphological methods to the assessment of sandstone deterioration at Angkor is presented. Damage diagnosis was carried out on the first eastern tier of the central pyramid of the 1,000 year-old Ta Keo temple. Methods combine field observations and measurements at 230 sampling points, high-resolution lasergrammetry and stereophotogrammetry on a 2-m² test zone, and SEM observations. The first results indicate that decay operates through a synergistic combination of weathering phenomena dominated by scaling and solution, and exhibits a high spatial variability. Percentages of deteriorated surfaces vary from 17.6 to 93.8%, and average stone recession values from 0.00 to 2.71 cm (minimum) and 0.34 to 5.49 cm (maximum). On the test-zone, stereophotogrammetry and 3D-mapping of the present and reconstructed initial states using lasergrammetry indicate that erosion scars up to 6 cm deep have formed since 1963. On the whole, the amount of deteriorated surfaces more than tripled between 1963 and 2008. The degree of implication of salts in stone decay remains unclear for most efflorescences are composed of calcite (CaCO3), with secondary importance of barite (BaSO4) and gypsum (CaSO₄·2H₂O). Future prospects aim to evaluate the impact on stone decay of the clearing out of the temple from the forest in the 1920s.     

Sediment Trend Analysis through the variation of granulometric parameters: A review of theories and applications

Spatial variations in grain-size parameters (i.e. grain-size trends) contain information on sediment transport patterns. Analytical procedures have been proposed using the grain-size trend to determine net sediment transport pathways. In the first part of this study, the fundamentals of the theory are presented through methods for analysing 1D and 2D variations. The methods used are critically discussed, while pointing out some severe problems. So far, these methods suffer from limitations leading to serious interpretational errors, making it necessary to take account of two kinds of uncertainties. Inputs uncertainties are linked to the physical sediment properties as well as procedures of sampling and analysis. Model uncertainties are then discussed for each step of the grain-size trend analysis. The validity of Sediment Trend Analysis under natural conditions is tested against published field studies to determine the most appropriate variation trend to use in a specific environment. Proposals are given for each step of the procedure for optimal use of the method using a Quality Assurance (QA) approach. Further developments are proposed, such as integration into a Geographic Information System.     

The use of principle component analyses in characterising trace and major elemental distribution in a 55 kyr peat deposit in tropical Australia: Implications to paleoclimate

The Lynch’s Crater peat deposit in NE-Australia is a sensitive environmental archive located in the tropical Southern Hemisphere. This unique deposit illustrates that local and regional changes had a profound effect on the local Australian ecosystem over the past 55 kyr. To obtain a proxy of past climate changes, trace and major element geochemistry analyses were applied to a 13 m peat core from the crater. Principle component analysis (PCA) was used to identify the main factors that control elemental distribution in the peat and to add interpretative strength to the geochemical behavior of selected major and trace elements. For example, Sc, Al, Cu, and Pb were found to be related to increased erosion of the basin soils, and from this, several periods of significant flux from atmospheric input and/or terrigenous run-off were identified. Geochemically mobile elements during rock weathering and pedogenesis, such as Mg, Ca, and Sr helped to identify the peat ombrotrophic-minerotrophic boundary at ∼1.5 m depth and offered important information about fluxes of these nutrients to the mire and their dynamics within the deposit. Arsenic and V comparisons between the peat record (high concentrations in some peat sections) and in local basin rocks (very low concentrations), suggested the presence of a long range, atmospheric dust source early in the formation of the mire. The Lynch’s Crater peat record presents a continuous record of environmental change in tropical Australia and contributes new understanding to geochemical processes in peatlands.     

Partial Melting and Counterclockwise P T Path of Subducted Oceanic Crust (Sierra del Convento Melange, Cuba)

Partial melting of subducted oceanic crust has been identifiedin the Sierra del Convento mélange (Cuba). This serpentinite-matrixmélange contains blocks of mid-ocean ridge basalt (MORB)-derivedplagioclase-lacking epidote ± garnet amphibolite intimatelyassociated with peraluminous trondhjemitic–tonalitic rocks.Field relations, major element bulk-rock compositions, mineralassemblages, peak metamorphic conditions (c. 750°C, 14–16kbar), experimental evidence, and theoretical phase relationssupport formation of the trondhjemitic–tonalitic rocksby wet melting of subducted amphibolites. Phase relations andmass-balance calculations indicate eutectic- and peritectic-likemelting reactions characterized by large stoichiometric coefficientsof reactant plagioclase and suggest that this phase was completelyconsumed upon melting. The magmatic assemblages of the trondhjemitic–tonaliticmelts, consisting of plagioclase, quartz, epidote, ±paragonite, ± pargasite, and ± kyanite, crystallizedat depth (14–15 kbar). The peraluminous composition ofthe melts is consistent with experimental evidence, explainsthe presence of magmatic paragonite and (relict) kyanite, andplaces important constraints on the interpretation of slab-derivedmagmatic rocks. Calculated P–T conditions indicate counterclockwiseP–T paths during exhumation, when retrograde blueschist-faciesoverprints, composed of combinations of omphacite, glaucophane,actinolite, tremolite, paragonite, lawsonite, albite, (clino)zoisite,chlorite, pumpellyite and phengite, were formed in the amphibolitesand trondhjemites. Partial melting of subducted oceanic crustin eastern Cuba is unique in the Caribbean realm and has importantconsequences for the plate-tectonic interpretation of the region,as it supports a scenario of onset of subduction of a youngoceanic lithosphere during the early Cretaceous (c. 120 Ma).The counterclockwise P–T paths were caused by ensuingexhumation during continued subduction. KEY WORDS: amphibolite; Cuba; exhumation; partial melting; trondhjemite; subduction     

Quantitative sinkhole hazard assessment. A case study from the Ebro Valley evaporite alluvial karst (NE Spain)

Quantitative sinkhole hazard assessments in karst areas allow calculation of the potential sinkhole risk and the performance of cost-benefit analyses. These estimations are of practical interest for planning, engineering, and insurance purposes. The sinkhole hazard assessments should include two components: the probability of occurrence of sinkholes (sinkholes/km² year) and the severity of the sinkholes, which mainly refers to the subsidence mechanisms (progressive passive bending or catastrophic collapse) and the size of the sinkholes at the time of formation; a critical engineering design parameter. This requires the compilation of an exhaustive database on recent sinkholes, including information on the: (1) location, (2) chronology (precise date or age range), (3) size, and (4) subsidence mechanisms and rate. This work presents a hazard assessment from an alluvial evaporite karst area (0.81 km²) located in the periphery of the city of Zaragoza (Ebro River valley, NE Spain). Five sinkholes and four locations with features attributable to karstic subsidence where identified in an initial investigation phase providing a preliminary probability of occurrence of 0.14 sinkholes/km² year (11.34% in annual probability). A trenching program conducted in a subsequent investigation phase allowed us to rule out the four probable sinkholes, reducing the probability of occurrence to 0.079 sinkholes/km² year (6.4% in annual probability). The information on the severity indicates that collapse sinkholes 10–15 m in diameter may occur in the area. A detailed study of the deposits and deformational structures exposed by trenching in one of the sinkholes allowed us to infer a modern collapse sinkhole approximately 12 m in diameter and with a vertical throw of 8 m. This collapse structure is superimposed on a subsidence sinkhole around 80 m across that records at least 1.7 m of synsedimentary subsidence. Trenching, in combination with dating techniques, is proposed as a useful methodology to elucidate the origin of depressions with uncertain diagnosis and to gather practical information with predictive utility about particular sinkholes in alluvial karst settings: precise location, subsidence mechanisms and magnitude, and timing and rate of the subsidence episodes.     

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

Pole-to-pole moisture conditions for the IGY

Summary A study of the mean atmospheric humidity conditions on a planetary scale during the IGY covering the calendar year 1958 is presented. The fields of mean precipitable water content and of the zonal and meridional transports of water vapor are analyzed for the entire globe. Zonally averaged values of the various quantities at several levels are presented in tabular form and compared whenever possible with previous results or indirectly are analyzed on the basis of information obtained from different sources. The structure of these fields is studied and the corresponding implications for the general circulations of the atmosphere are discussed. Finally the zonal water balance for all the globe is discussed and its implications analyzed.     

Correlation of atmospheric occurences over the United States with some physical and chemical parameters. Part III: Frequencies of precipitation

Summary Correlation between some physical and chemical variables, measured at 28 stations of the United States Weather Bureau Network, and seasonal and annual frequencies of precipitation, has been attempted with the aim of gaining insight into the bearing of such variables, on occurrence of precipitation. — Concurrent trends of frequencies with local temperature functions, altitude parameters, precipitable water vapour increments, and some chemical species have been found.Contribution of the «Centro Nucleazione Aerosoli» of the National Research Council of Italy, Via Vettore 4 (Monte Sacro),Roma.